How To Lay Artificial Grass Like A Pro – Here’s An 8-Step Guide To DIY Turf Installation

How To Lay Artificial Grass Like A Pro – Here’s An 8-Step Guide To DIY Turf Installation
February 14 09:07 2017 Print This Article

When properly installed, a synthetic grass does not actually require regular maintenance aside from occasionally spraying it. While turf installation can be done by professional installers, you can still have the choice to do it by yourself. However, be sure that you have the knowhow.

Now that you have done choosing the right synthetic grass installer according to Australian Synthetic Lawns, it’s time to get the ball rolling. Here are 8 steps to DIY turf installation.

  1. Prep up the site by removing the soil’s top level.

When laying the fake lawn over the soil, dig the top level, at 3 -4 inches, in order to make way for the new base. Remove other plants and grass which can cause to uneven surface. Don’t try hard to perfectly grade the remaining surface. You can use a hand tamp or just walk over it.

  1. Plan the drainage.

When installing turf, there should be a drainage. One tip: when you are installing the fake lawn over a poor-draining soil, you must set a draining system before pushing through, especially if there is no drain around. If you live in a region with light rainfall, it’s wise to leave small draining gaps every 6 inches around its perimeter.

  1. Mount a border.

Lay a border, preferably waterproof, around the perimeter. This is to keep your lawn from separating and slumping over the course of time. One of the most common options is to use a plastic bended board. Be sure that it won’t protrude about the level of the grass to avoid damage.

  1. Adding the base material.

Look for a trusted turf accessory supplies and buy gravel, decomposed granite, crushed rock and other necessary base materials. Fill out the excavated section with about 3 to 4 inches to improve drainage and avoid slumping. When installing the lawn over a hard surface, you may use a self-leveling compound.

  1. Rake the

Next step is to grade the base. You may use a rake to smooth the base materials out. Also, utilize a string, ruler and a bubble level in grading flat surfaces.

  1. Install the turf.

Know how much space on your lawn will need fake grass. With someone as a partner, stretch both strips of the grass and lay it down over the base. Be sure not to drag down the lawn over the base, though, in order to keep the smooth surface. Be sure that the turf is laid with all the blades in one direction to make it look natural.

  1. Cut the fake grass where needed.

By using a utility knife or a carpet cutter, cut the turf’s underside whenever needed by the shape. IN making long cuts, short distances should be cut at a time and then check the edge to see if there are gaps.

  1. Seam the strips together.

You may install a seaming tape on the ground and place both the strips on its top. You may also fasten the strips together by using stakes, about 1 every 3 inches.

When thinking of a DIY turf installation, you must prepare for a tough job. However, in the event that you want a convenient way to lay your fake grass, it’s best to hire professional fake turf installers like Australian Synthetic Lawns in Sydney in order to achieve a perfectly manicured fake lawn that looks like the real thing.

view more articles

About Article Author

Mary Gaines
Mary Gaines

View More Articles